Llansamlet Tile Cleaning

This client in Llansamlet wanted to remove their existing parquet flooring as they were aware there was a Victorian tiled floor underneath. They were keen to see if we could clean and refurbish the original tiled floor dating back to the early 1920s that had been covered over in the 70s. Whilst they liked the Parquet floor, having seen their neighbours property they were really keen to recover the floor as an original feature.

I paid a visit to the property and whilst there we lifted a section of Parquet to see how easily they would come up. It was certainly possible to remove the floor, but it was clear the biggest issue would be removing the sticky bitumen that the parquet tiles had been stuck down with. Having said that I knew from previous experience it could be done, although it would be time consuming, so I gave them a price which they were happy with and we scheduled a date to return.

Cleaning a Victorian Tiled Hallway Floor

On the first day we got to work, starting by protecting the skirting and woodwork to avoid getting bitumen residue on them. Upon removal of the Parquet we got to grips with the bitumen adhesive which was used to stick the parquet to the tile. This didn’t disappoint and proved to be a very stubborn. We found the best way to deal with it was to start by carefully scraping off as much of the solidified bitumen with a blade as possible. This left a residual bitumen layer that could not be fully removed but was weakened with the application of white spirit to bleed the bitumen, a time-consuming exercise but the results are there for all to see.

Once all the bitumen was removed, we used diamond burnishing pads starting on a 400-grit pad and finishing on an 800-grit pad using water to lubricate. This removes and T-Cuts the surface of the floor. The resultant soil was rinsed off the tiles and extracted with a wet vacuum. This was a long task but thankfully the floor underneath was looking pretty good.

We then neutralized the floor with water and were careful to make sure there was no bitumen residue remaining. The floor was left for 24 hours to dry off fully before sealing.

Sealing a Victorian Tiled Hallway Floor

The customer specified they wanted a durable satin finish for the floor so I applied Tile Doctor Seal and Go which we recommend for Victorian tiles. This product is specially formulated water-based blend of acrylic polymers which provides both a stain resistant surface seal and a durable low-sheen finish. The seal ensures this heavy traffic area will be protected.

The customer was thrilled with the transformation.

For regular cleaning I recommended the use of Tile Doctor Neutral Tile Cleaner which is formulated for use with sealed surfaces and won’t prematurely break down the sealer which is the problem with many supermarket cleaning products.

 

Professional Restoration of a Victorian Tiled Hallway in Swansea